The order took longer to ship and arrive than it was supposed to by several days, and then showed up incomplete. It's advertised as a set of four, clearly pictured as a set of four, and arrived missing a piece.
Customer Reviews
Overall rating: 4.6 / 5 from 409 reviews.
Great product!
3D printed ring and connector work very well, excellent light as well, couldn’t recommend enough.
Couldn’t be happier with the VTC led headlight kit for my 2011 Road Glide. Installation was super easy and fitment was great. Totally changed the look of my bike!
Perfect fit and very useful for holding registration or small tools !
Got my shipment. Haven't tried them yet. Looks like they should work.
99-17 Dyna lift block adapters
Store owner replied: You don’t need (4) pieces, the design changed to only utilize the 3 big blocks now.
Works great!!! Very strong and holders my bike for days at a time. I use plywood across my lift arms as they are wide. Can’t beat for the price and I would highly recommend this solution to anyone.
Commande correspondant à mes attentes
Great product straight forward install pretty simple if you know how to turn some wrenches. Would recommend if your doing a roadglide to wire one light on accessories switch and the second one on high beam. It's bright, about 8x more than stock with really good halogens. I dig the amber light as a high and never did I think an amber light would be so bright.
Blocks fit great, exactly what I needed! Magnets kept them where they needed to be
Perfect fit!
Blocks work perfect and are a must have!! Thanks again Dale
Make it stronger or thicker at the top. Sent an email with photo showing it's flaw on first use asking for a replacement part but got no response back.
99-17 Dyna lift block adapters
Store owner replied: Eric, sorry about this. Looks like a filament change happened so now there is a weak spot in the part. I will look into the emails and reach out to you about replacing the set for free. Mike
Blocks are way to long Cheap plastic No way would I lift my bike with these even if they fit
99-17 Dyna lift block adapters
Store owner replied: Hey Larry please explain to me how they are too long? I can understand you thinking they might be too tall. If that’s the case please explain to me how to reckon to solve this issue? The shark fin is that lowest point in the bike. So theoretically if you make the (3) other blocks “thinner” like the small one it still wouldn’t help you because the shark fin is lower by that much and your bike would sit cocked like it does without any lift blocks. Thanks for being ignorant and leaving me a bad review because of your incompetence.
Works perfect and is a genius idea. Finally able to jack the bike without worrying about it tipping over!
Great alternative to the factory blocks that are no longer available. They are a bit tall for my particular jack but, with a little rocking of the bike, they fit. Definitely worth the price if you’re working on a Dyna.
Broke on first use.
Had to shave the housing a bit. The light was a few mills too big. Also had to get a longer screw for the headlamp bezel but not a problem $.59 at the hardware store. Light looks good. Just something new previously had a Harley Daymaker so we shall see how night riding goes with this set up.
Met my custom request for two amber lights (I see it’s in the dropdown now haha) bracket is STURDY. Can’t wait to install!
Everything worked great! Just as promised.
these blocks are going to be great!
Excellent product. The magnets mean I no longer need another set of hands to keep everything in place and it feels secure when its suspended. Thanks heaps 😎🤙
Nice solution for a dyna problem. Worked as designed and helped me upgrade my suspension.
Good quality got them fast! Support independent shops!
Confirmed fitment on my 1998 sportster with dual retaining ring bucket. You'll need the ring from a single ring bucket and run that on the front of the dual bucket. Lil touch of powder coating on the led bezel. I'm loving the new setup.
Fits the frame perfectly. Finally can lift my bike without the butt pucker
So far so good…My buddies have these lights and love them…Hell why not !
Perfect fit.
Great little adapter for the new headlight. Snug fit and better than spending a couple hundred dollars on the same thing just for a brand name. Great bang for the buck. 100% recommend
Green lifter block adapters 2005 FXD frame are perfect. As a 120lbs woman I can now confidently not only work on but move it around with no issues. Creates a nice solid surface created. Also my order shipped quickly. Will definitely order in the future. Thanks!
Awesome addition to my toolboard. Perfect fitment
Rock solid much better than shimming with wood leftovers and safer too boot
Fit great no issues would recommend
They work good , I can finally lift my Dyna!
Awsome bracket I did have to cut all tabs except light mounting tabs. Weld to original fxrp bracket and then mount. All in all was good part and worked as I planned just by looking at it online. Maybe 30 mins to cut weld and paint then mount and install light. I’m sure smaller bracket light would have bolted right up but for me to keep 7” light had to make fit and worked out perfect.
A game changer for lifting the Dyna on a standard lift. I use the gear wrench brand ATV lift, excellent build quality and it matches the orange perfect. These blocks are great quality and the magnet feature inside is nice. Highly recommended.
The Kit itself is excellent. But the amazon light I’ll have to check out at night, not really a fan of the low beam really only being accent lighting from the looks of it.
Easy plug n play l99ks dope!
First day received, I tested since I have tons of maintenance, but I wasn't able to get it 2" off the deck.
Fits perfect, super bright, easy instructions, fast shipping & great customer service!
Customer Reviews
Overall rating: 4.6 / 5 from 409 reviews.
The order took longer to ship and arrive than it was supposed to by several days, and then showed up incomplete. It's advertised as a set of four, clearly pictured as a set of four, and arrived missing a piece.
Great product!
3D printed ring and connector work very well, excellent light as well, couldn’t recommend enough.
Couldn’t be happier with the VTC led headlight kit for my 2011 Road Glide. Installation was super easy and fitment was great. Totally changed the look of my bike!
Perfect fit and very useful for holding registration or small tools !
Got my shipment. Haven't tried them yet. Looks like they should work.
99-17 Dyna lift block adapters
Store owner replied: You don’t need (4) pieces, the design changed to only utilize the 3 big blocks now.
Works great!!! Very strong and holders my bike for days at a time. I use plywood across my lift arms as they are wide. Can’t beat for the price and I would highly recommend this solution to anyone.
Commande correspondant à mes attentes
Great product straight forward install pretty simple if you know how to turn some wrenches. Would recommend if your doing a roadglide to wire one light on accessories switch and the second one on high beam. It's bright, about 8x more than stock with really good halogens. I dig the amber light as a high and never did I think an amber light would be so bright.
Blocks fit great, exactly what I needed! Magnets kept them where they needed to be
Perfect fit!
Blocks work perfect and are a must have!! Thanks again Dale
Make it stronger or thicker at the top. Sent an email with photo showing it's flaw on first use asking for a replacement part but got no response back.
99-17 Dyna lift block adapters
Store owner replied: Eric, sorry about this. Looks like a filament change happened so now there is a weak spot in the part. I will look into the emails and reach out to you about replacing the set for free. Mike
Blocks are way to long Cheap plastic No way would I lift my bike with these even if they fit
99-17 Dyna lift block adapters
Store owner replied: Hey Larry please explain to me how they are too long? I can understand you thinking they might be too tall. If that’s the case please explain to me how to reckon to solve this issue? The shark fin is that lowest point in the bike. So theoretically if you make the (3) other blocks “thinner” like the small one it still wouldn’t help you because the shark fin is lower by that much and your bike would sit cocked like it does without any lift blocks. Thanks for being ignorant and leaving me a bad review because of your incompetence.
Works perfect and is a genius idea. Finally able to jack the bike without worrying about it tipping over!
Great alternative to the factory blocks that are no longer available. They are a bit tall for my particular jack but, with a little rocking of the bike, they fit. Definitely worth the price if you’re working on a Dyna.
Broke on first use.
Had to shave the housing a bit. The light was a few mills too big. Also had to get a longer screw for the headlamp bezel but not a problem $.59 at the hardware store. Light looks good. Just something new previously had a Harley Daymaker so we shall see how night riding goes with this set up.
Met my custom request for two amber lights (I see it’s in the dropdown now haha) bracket is STURDY. Can’t wait to install!
Everything worked great! Just as promised.
these blocks are going to be great!
Excellent product. The magnets mean I no longer need another set of hands to keep everything in place and it feels secure when its suspended. Thanks heaps 😎🤙
Nice solution for a dyna problem. Worked as designed and helped me upgrade my suspension.
Good quality got them fast! Support independent shops!
Confirmed fitment on my 1998 sportster with dual retaining ring bucket. You'll need the ring from a single ring bucket and run that on the front of the dual bucket. Lil touch of powder coating on the led bezel. I'm loving the new setup.
Fits the frame perfectly. Finally can lift my bike without the butt pucker
So far so good…My buddies have these lights and love them…Hell why not !
Perfect fit.
Great little adapter for the new headlight. Snug fit and better than spending a couple hundred dollars on the same thing just for a brand name. Great bang for the buck. 100% recommend
Green lifter block adapters 2005 FXD frame are perfect. As a 120lbs woman I can now confidently not only work on but move it around with no issues. Creates a nice solid surface created. Also my order shipped quickly. Will definitely order in the future. Thanks!
Awesome addition to my toolboard. Perfect fitment
Rock solid much better than shimming with wood leftovers and safer too boot
Fit great no issues would recommend
They work good , I can finally lift my Dyna!
Awsome bracket I did have to cut all tabs except light mounting tabs. Weld to original fxrp bracket and then mount. All in all was good part and worked as I planned just by looking at it online. Maybe 30 mins to cut weld and paint then mount and install light. I’m sure smaller bracket light would have bolted right up but for me to keep 7” light had to make fit and worked out perfect.
A game changer for lifting the Dyna on a standard lift. I use the gear wrench brand ATV lift, excellent build quality and it matches the orange perfect. These blocks are great quality and the magnet feature inside is nice. Highly recommended.
The Kit itself is excellent. But the amazon light I’ll have to check out at night, not really a fan of the low beam really only being accent lighting from the looks of it.
Easy plug n play l99ks dope!
First day received, I tested since I have tons of maintenance, but I wasn't able to get it 2" off the deck.
Fits perfect, super bright, easy instructions, fast shipping & great customer service!